Got a complaint against water damaged smartphone? To shed light on it, note that only a handful of devices damaged by water actually turn on depending upon the severity of water damage. The thing here is simple, water and electronic devices do not go hand-in-hand unless there is a water-resisting layer in-between and since smartphones lose warranty when they are water damaged, it is literally out of warranty that allows you to test out other avenues to fix the issue before proceeding to the professionals at the Telecast authorized service center. Here’s a different but traditional approach toward fixing a water damaged smartphone.
What are the things you must avoid?
Prior to knowing what you should do to fix it, you must know what you mustn’t because knowing it will reduce the chances of you unintentionally putting the device is a severe danger against water.
First up, let’s say that you dropped your water in water or vice versa, in such cases, you mustn’t take much time to think and panic because the elongated duration can render the phone completely useless. Also, once you remove the device, no need to use a vacuum cleaner or air blower to suck or blow out the water trapped because it will definitely backfire. Another thing to learn here is to avoid pressing, shaking, or dabbing the display or any other part of the device because it is quite possible that doing so pushes the water deep which is another big NO.
Next thing you shouldn’t do is to avoid pressing buttons because of the same reasons aforementioned. Finally, do not connect the phone to a charger seems you very well know how electricity will react upon connection with water.
How to fix Teclast water damaged smartphone?
Here’s a step-by-step troubleshooting guide that must help you fix a water damaged smartphone traditionally.
Take out the fish
Okay, keeping aside the dad joke, you must remove the phone out of water body (pond, pool, sink, commode, or whatever) or if you spilled water on it, simply move the phone to a dry surface possibly where there’s sunlight.
Wipe it off
Next is to take a clean cloth or paper towel or microfiber cloth to wipe off the exterior of the device carefully since you cannot shake or wobble the device at this instance. Ensure that you clean the exterior of the device by soaking any traces of water visible. You can use a paper towel to insert it in the headphone jack and charging port by rolling it so that you can soak any traces of water hidden in these orifices which are an easy way out for water droplets to escape into the internal circuitry.
Open it up
Next thing you can do is to open up the device i.e. back panel, battery (if removable). You can remove the memory card and SIM card at this instance as well. Take a cloth and wipe off these components as well and keep it on a dry surface and preferably in the sunlight.
Use the Vacuum Cleaner
Next thing you know that you should take a vacuum cleaner (no air blowers) and use it on a light setting. You need to use the hose to soak water from across the device by pointing it into the orifices, openings, ports, etc. Do it a number of times and then proceed with the next step.
The traditional approach
Instead of lurking on the internet checking out methods to fix Teclast water damaged smartphone, you should concentrate by adhering to this traditional approach which ‘might’ work in some cases if not all. You need a ziplock bag and put the phone in it and fill it up with uncooked rice or silica gel litter whichever you are able to source. Seal the bag and keep it idle for two to three days before opening it.
The revelation
After the said period, unzip the bag and remove the phone. Since uncooked rice is a great water absorbent, it must have soaked all traces of water and moisture out of the system which means at this moment, the device is free of any liquid although there are chances that water has already damaged one or more hardware components. Anyhow, you need to press the power button to check if the phone boots or not. Note that if it doesn’t boots up, you can actually charge the battery a bit because it might have drained completely during the ordeal. Once you charge the battery for like 15 minutes, you can proceed by turning on the device. This might take a number of attempts but if it doesn’t boots up, you don’t have a choice but to visit a nearby service center.
A not-so-traditional method
This particular method doesn’t belong to everyone reading this how to fix water damaged smartphone troubleshooting guide. Since this method is kind of risky and would put the phone in jeopardy, you mustn’t proceed with it unless you actually know how to dismantle and reassemble the device in its working condition.
Assuming that there is a no damage to any hardware component which will require replacement or repair, you can take a chance by dismantling the device and kind-of ‘washing’ it any traces of water or moisture from the internal circuitry. You need rubbing alcohol which is also known as isopropyl alcohol that you can smear on a cotton swab or a clean cloth and use it to dab across the motherboard. The alcohol will evaporate immediately and so is the water and moisture while it will also get rid of any corrosion-causing debris, etc.
The final memorandum
The last thing we would add here with this troubleshooting guide is to report the problem to a nearby service center (third-party or authorized). This is because water damage is one of the greatest reason for phones going useless. You need professionals to look into the matter, clean up the device, repair or replace components if necessary, etc at a premium since no smartphone maker covers water damage unless the device has an official IP rating or so.
What are the chances of retrieving a water damaged smartphone?
Depending upon the severity, the chances could be slim since water is one of the greatest enemies to electronic devices. Unless the device has a water-resistance coating, the phone is insecure against even a droplet of water if the latter escapes into the internal circuitry and affects any hardware component such as a processor, etc.
What are the preventive measures against water damage?
There are a number of ways you can secure your phone against the deadly threat of water. First up, you can use a waterproof phone case or cover to secure it against water. The most effective tip is to avoid using the phone near water which must end the misery of checking out ways to fix a water damaged smartphone once and for all. If you weren’t able to revive the phone after water damage, you can check out Google to search for smartphones with at least unofficial water resistance if not an official certification that costs more.
